Juniper QFX Series User Manual

•
The grounding lug required is a Panduit LCD10-10A-L or equivalent. This grounding lug
is provided in the accessory kit. The grounding lug provided accommodates 14–10 AWG
(2-5.3 mm²) stranded wire.
•
The grounding cable that you provide for a QFX3500 edge device must be 14 AWG
(2 mm²), minimum 60° C wire, or as permitted by the local code.
Related
Documentation
• AC Power Supply for a QFX3500 Device on page 73
• Connecting AC Power to a QFX3500 Device on page 265
Copyright © 2012, Juniper Networks, Inc.78
QFX3000 Hardware Documentation

Juniper QFX Series Specifications

General

Category	Switch
Series	QFX
Form Factor	1U, 2U, and modular chassis options
Power Supply	Redundant, hot-swappable power supplies
Cooling	hot-swappable fans
Virtual Chassis	Supported on certain models
Typical Use	Data center, cloud
Operating System	Junos OS
Management	CLI
Key Features	High performance, low latency, automation
Latency	Sub-microsecond latency
Port Density	Varies by model (e.g., QFX5100: up to 48x10GbE + 6x40GbE)