Juniper QFX Series User Manual

Figure 6: QFX3008-I Data Plane and Control Plane Connections
VC0
VC1
c0
ge-3/0/39
ge-1/0/39
ge-2/0/39
ge-3/0/39
ge-0/0/39
IC0
IC1
ge-2/0/39
ge-0/0/39
ge-1/0/39
cb0
cb1
cb0
cb1
Port 0 Port 1
Port 0
Port 1
Port 0 Port 1
Port 0
Port 1
g041147
Node0
Node0:fte-0/1/1
Node0:xe-0/0/0
Node0:fte-0/1/3
Node0:xe-0/0/46
IC0:fte-7/0/0
IC1:fte-0/0/0
Server
Storage
Data
Plane
Control
Plane
Related
Documentation
Understanding Node Devices on page 17•
• Understanding the QFabric Switch Data Plane
• Understanding the QFabric Switch Control Plane
• Understanding the QFabric System Hardware Architecture on page 7
Copyright © 2012, Juniper Networks, Inc.16
QFX3000 Hardware Documentation

Juniper QFX Series Specifications

General

Category	Switch
Series	QFX
Form Factor	1U, 2U, and modular chassis options
Power Supply	Redundant, hot-swappable power supplies
Cooling	hot-swappable fans
Virtual Chassis	Supported on certain models
Typical Use	Data center, cloud
Operating System	Junos OS
Management	CLI
Key Features	High performance, low latency, automation
Latency	Sub-microsecond latency
Port Density	Varies by model (e.g., QFX5100: up to 48x10GbE + 6x40GbE)