Advarsel Unngå utsettelse for stråling,og stirr ikkeinn i åpninger som er åpne,
fordi usynlig stråling kan emiteres fra portens åpning når det ikke er tilkoblet
en fiberkabel.
Aviso Dada a possibilidade de emissão de radiação invisível atravésdo orifício
da via de acesso, quando esta não tiver nenhum cabo de fibra conectado,
deverá evitar a exposição à radiação e não deverá olhar fixamente para
orifícios que se encontrarem a descoberto.
¡Atención! Debido a que la apertura del puerto puede emitir radiacióninvisible
cuando no existe un cable de fibra conectado, evite mirar directamente a las
aperturas para no exponerse a la radiación.
Varning! Osynlig strålning kan avges från en portöppning utan ansluten
fiberkabel och du bör därför undvika att bli utsatt för strålning genom att inte
stirra in i oskyddade öppningar.
Related
Documentation
General Safety Guidelines and Warnings on page 161•
• Laser and LED Safety Guidelines and Warnings for EX Series Switches
• Installation Instructions Warning on page 173
• Grounded Equipment Warning on page 183
• Laser and LED Safety Guidelines and Warnings for the QFX Series on page 168
Laser and LED Safety Guidelines and Warnings for the QFX Series
QFX Series devices are equipped with laser transmitters:
•
SFP and SFP+ transceivers are classified as Class 1 Laser Products (complies with 21
CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice 50, dated July
26, 2001) or Class 1 LED Products.
•
QSFP+ transceivers are classified as Class 1M Laser Products (IEC 60825-1 2001–01).
Observe the following guidelines and warnings:
•
General Laser Safety Guidelines on page 169
•
Class 1M Laser Product Warning on page 169
•
Class 1M Laser Radiation Warning on page 169
•
Class 1 Laser Product Warning on page 169
•
Class 1 LED Product Warning on page 170
•
Laser Beam Warning on page 170
•
Unterminated Fiber-Optic Cable Warning on page 171
Copyright © 2012, Juniper Networks, Inc.168
QFX3000 Hardware Documentation
To Next Page
Loading...
Need help?
General
