Juniper QFX Series - Multiple Power Supplies Disconnection Warning; TN Power Warning

tamaño apropiado paraloscablesque se utilicen,y tendránque sujetar tanto
el aislante como el conductor.
Varning! När flertrådiga ledningar krävs måste godkända ledningskontakter
användas, t.ex. kabelsko av sluten eller öppen typ med uppåtvänd tapp.
Storleken på dessa kontakter måste vara avpassad till ledningarna och måste
kunna hålla både isoleringen och ledaren fastklämda.
Related
Documentation
General Safety Guidelines and Warnings on page 161•
• General Electrical Safety Guidelines and Warnings on page 191
• DC Power Electrical Safety Guidelines on page 197
• DC Power Disconnection Warning on page 198
• DC Power Grounding Requirements and Warning on page 200
• DC Power Wiring Sequence Warning on page 201
Multiple Power Supplies Disconnection Warning
This topic applies to hardware devices in the EX Series product family, which includes
switches, the EX Series Redundant Power System (RPS), and the XRE200 External
Routing Engine.
This topic also applies to hardware devices in the QFX Series.
WARNING: For a device that has more than one power supply connection,
you must ensure that all power connections are fully disconnected so that
power to the device is completely removed.
Related
Documentation
General Safety Guidelines and Warnings on page 161•
• General Electrical Safety Guidelines and Warnings on page 191
• AC Power Electrical Safety Guidelines on page 194
• DC Power Electrical Safety Guidelines on page 197
TN Power Warning
This topic applies to hardware devices in the EX Series product family, which includes
switches, the EX Series Redundant Power System (RPS), and the XRE200 External
Routing Engine.
This topic also applies to hardware devices in the QFX Series.
Copyright © 2012, Juniper Networks, Inc.204
QFX3000 Hardware Documentation