Juniper QFX Series User Manual

Figure 7: QFX3500 Data Plane and Control Plane Connections
VC0
VC1
ge-0/0/0
ge-0/0/0
C1
C0
Data
Plane
Control
Plane
Front view
Rear view
IC0
IC1
IC0:fte-7/0/6
IC1:fte-0/0/6
Node0:fte-0/1/0
Node0:xe-0/0/0
Node0:fte-0/1/2
Node0:xe-0/0/46
Node0
Server
Storage
g041146
Related
Documentation
Configuring Aliases for the QFabric Switch•
• Configuring Node Groups for the QFabric Switch
• Understanding Node Groups on page 19
• Understanding Interconnect Devices on page 14
• Understanding the QFabric Switch Data Plane
• Understanding the QFabric Switch Control Plane
• Understanding the QFabric System Hardware Architecture on page 7
Copyright © 2012, Juniper Networks, Inc.18
QFX3000 Hardware Documentation

Juniper QFX Series Specifications

General

Category	Switch
Series	QFX
Form Factor	1U, 2U, and modular chassis options
Power Supply	Redundant, hot-swappable power supplies
Cooling	hot-swappable fans
Virtual Chassis	Supported on certain models
Typical Use	Data center, cloud
Operating System	Junos OS
Management	CLI
Key Features	High performance, low latency, automation
Latency	Sub-microsecond latency
Port Density	Varies by model (e.g., QFX5100: up to 48x10GbE + 6x40GbE)