Juniper QFX Series User Manual

CHAPTER 26
Replacing QFX3008-I Components
•
Installing and Removing QFX3008-I Interconnect Device Hardware
Components on page 322
•
Removing an AC Power Supply from a QFX3008-I Interconnect Device on page 323
•
Installing an AC Power Supply in a QFX3008-I Interconnect Device on page 324
•
Removing a Wiring Tray from a QFX3008-I Interconnect Device on page 326
•
Installing a Wiring Tray in a QFX3008-I Interconnect Device on page 328
•
Removing a Bottom Fan Tray and Front Panel Display from a QFX3008-I Interconnect
Device on page 329
•
Installing a Bottom Fan Tray and Front Panel Display in a QFX3008-I Interconnect
Device on page 331
•
Removing a Side Fan Tray from a QFX3008-I Interconnect Device on page 332
•
Installing a Side Fan Tray in a QFX3008-I Interconnect Device on page 334
•
Removing a Top Fan Tray from a QFX3008-I Interconnect Device on page 336
•
Installing a Top Fan Tray in a QFX3008-I Interconnect Device on page 337
•
Removing a Bottom Air Filter from a QFX3008-I Interconnect Device on page 338
•
Installing a Bottom Air Filter in a QFX3008-I Interconnect Device on page 340
•
Removing a Side Air Filter from a QFX3008-I Interconnect Device on page 341
•
Installing a Side Air Filter in a QFX3008-I Interconnect Device on page 343
•
Taking a Control Board Offline in a QFX3008-I Interconnect Device on page 345
•
Removing a Control Board from a QFX3008-I Interconnect Device on page 347
•
Installing a Control Board in a QFX3008-I Interconnect Device on page 349
•
Taking a 16-Port QSFP+ Front Card Offline in a QFX3008-I Interconnect
Device on page 351
•
Removing a 16-Port QSFP+ Front Card from a QFX3008-I Interconnect
Device on page 352
•
Installing a 16-PortQSFP+ Front Card in a QFX3008-I Interconnect Device on page 353
•
Taking the Rear Card Offline in a QFX3008-I Interconnect Device on page 355
•
Removing a Rear Card from a QFX3008-I Interconnect Device on page 356
•
Installing a Rear Card in a QFX3008-I Interconnect Device on page 358
321Copyright © 2012, Juniper Networks, Inc.

Juniper QFX Series Specifications

General

Category	Switch
Series	QFX
Form Factor	1U, 2U, and modular chassis options
Power Supply	Redundant, hot-swappable power supplies
Cooling	hot-swappable fans
Virtual Chassis	Supported on certain models
Typical Use	Data center, cloud
Operating System	Junos OS
Management	CLI
Key Features	High performance, low latency, automation
Latency	Sub-microsecond latency
Port Density	Varies by model (e.g., QFX5100: up to 48x10GbE + 6x40GbE)