CHAPTER 18
Installing a QFX3100 Director Device
•
Installing and Connecting a QFX3100 Director Device on page 213
•
Unpacking a QFX3100 Director Device on page 213
•
Mounting a QFX3100 Director Device on Two Posts in a Rack or Cabinet on page 215
•
Mounting a QFX3100 Director Device on Four Posts in a Rack or Cabinet on page 217
•
Connecting AC Power to a QFX3100 Director Device on page 218
•
Powering On a QFX3100 Director Device on page 220
Installing and Connecting a QFX3100 Director Device
To install and connect a QFX3100 Director device:
1. Follow instructions in “Unpacking a QFX3100 Director Device” on page 213.
2. Mount the QFX3100 Director device by following instructions appropriate for your site:
•
“Mounting a QFX3100 Director Device on Two Posts in a Rack or Cabinet” on page 215
(using the mounting brackets provided)
•
“Mounting a QFX3100 Director Device on Four Posts in a Rack or Cabinet” on page217
(using the mounting brackets provided)
3. Follow instructions in “Connecting AC Power to a QFX3100 DirectorDevice” on page 218
to connect power.
4. See “QFX3000-G QFabric System Installation Overview” on page 209 for information
about the steps to install and configure your QFX3000 QFabric system.
Related
Documentation
Rack Requirements for a QFX3100 Director Device on page 93•
• Cabinet Requirements for a QFX3100 Director Device on page 97
• Clearance Requirements for Airflowand Hardware Maintenancefora QFX3100 Director
Device on page 99
Unpacking a QFX3100 Director Device
The QFX3100 Director devices are shipped in a cardboard carton, secured with foam
packing material. The carton also contains an accessory box and quick start instructions.
213Copyright © 2012, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
