at the male end of the power cord fits into the power source outlet that is standard for
your geographical location.
CAUTION: The AC power cord for the device is intended for use with that
chassis only and not for any other use.
NOTE: In North America, AC power cords must not exceed 4.5 meters
(approximately 14.75 feet) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical
Code (CEC) Section 4-010(3). The cords supplied with the QFX3500 device
are in compliance.
Table 53 on page 148 lists AC power cord specifications provided for each country or
region.
Table 53: AC Power Cord Specifications
Plug StandardsElectrical SpecificationsCountry/Region
AS/NZ 3112-1993250 VAC, 10 A, 50 HzAustralia
GB2099.1 1996 and GB1002 1996
(CH1-10P)
250 VAC, 10 A, 50 HzChina
CEE (7) VII250 VAC, 10 A, 50 HzEurope (exceptItaly, Switzerland, and
United Kingdom)
CEI 23-16/VII250 VAC, 10 A, 50 HzItaly
JIS 8303125 VAC, 12 A, 50 Hz or 60 HzJapan
NEMA 5-15125 VAC, 13 A, 60 HzNorth America
KSC 8305250 VAC, 10 A, 60 HzSouth Korea
SEV 1011 SEV 6534/2250 VAC, 10 A, 50 HzSwitzerland
BS 1363A250 VAC, 10 A, 50 HzUnited Kingdom
Figure 54 on page 148 illustrates the plug on the power cord for some of the countries or
regions listed in Table 53 on page 148.
Figure 54: AC Plug Types
Copyright © 2012, Juniper Networks, Inc.148
QFX3000 Hardware Documentation
To Next Page
Loading...
Need help?
General
