Mindray BeneVision N22 - Oxycrg Review Page

31 - 8 BeneVision N22/N19 Patient Monitor Operator’s Manual
31.2.6.3 Setting Duration
You can set the time interval at which compressed waveforms are displayed. To set the time interval, follow this
procedure:
1. Enter the full disclosure review page.
2. Select
Duration.
31.2.6.4 Viewing Details of Compressed Waveforms
To view the full waveforms and numeric values, follow this procedure:
1. Enter the full disclosure review page.
2. Select
Details.
31.2.6.5 Changing the ECG Gain
To change the ECG gain, follow this procedure:
1. Enter the full disclosure review page.
2. Select
Details.
3. Set
ECG Gain.
31.2.6.6 Changing the Waveform Speed
To change the waveform sweep speed, follow this procedure:
1. Enter the full disclosure review page.
2. Select
Details.
3. Set
Speed.
31.2.7 OxyCRG Review Page
You can review up to 48 hours’ trend curves on the OxyCRG review page. The OxyCRG review functionality is
applicable for neonatal monitoring only.
31.2.7.1 Entering the OxyCRG Review Page
Choose one of the following methods to enter the OxyCRG review page:
■ Select the Review quick key → select the OxyCRG tab.
■ Select the Main Menu quick key → from the Review column select OxyCRG.
31.2.7.2 Changing the Resolution of Trend Curves
To set the resolution of trend curves, follow this procedure:
1. Enter the OxyCRG review page.
2. Set
Zoom.
31.2.7.3 Changing the Compressed Waveform
To set the compressed waveform, follow this procedure:
1. Enter the OxyCRG review page.
2. Set
Waveform.