Mindray BeneVision N22 - NMT Default Settings; Rso Default Settings

BeneVision N22/N19 Patient Monitor Operator’s Manual C - 19
C.18 NMT Default Settings
C.19 rSO
2
Default Settings
Filter On
Auto Check On
BIS Expand View
Default Setting
Parameter 1 BIS L
Parameter 2 EMG
Trend Length 60 min
Item Default Setting
Item Default Setting
Stimulation Current Supra (60 mA)
Pulse Width 200 s
Block Recovery Off
Stimulation Beep Volume 2
Interval TOF Mode: 1 min
ST Mode: 10 sec
DBS Mode: 1 min
DBS Mode 3.3
Item Default Setting
rSO
2
-1/rSO
2
-2/
rSO
2
-1’/rSO
2
-2’
Alarm switch On
High limit 90
Low limit 40
Priority Med
Print on Alarm Off
rSO
2
-1/rSO
2
-2/
rSO
2
-1’/rSO
2
-2’
Variance
Low Limit -20
Auto Low Limit Off
rSO
2
-1 Label L
rSO
2
-2 Label R
rSO
2
-1’ Label S1
rSO
2
-2’ Label S2
AUC Mode Below Baseline Percentage
Fixed Threshold 50
Percentage Below Baseline 25
Select Parameter Baseline, Baseline Variance