Mindray BeneVision N22 User Manual

BeneVision N22/N19 Patient Monitor Operator’s Manual 34 - 3
34.3 Stopping Recordings
Recordings can be stopped manually or automatically.
34.3.1 Stopping Recordings Manually
To manually stop a recording, you can either:
■ Press the hardkey again, or
■ Select Clear All Tasks in the Record Setup menu.
34.3.2 Stopping Recordings Automatically
Recordings stop automatically when:
■ A recording is completed.
■ The recorder runs out of paper.
■ When the recorder has an alarm condition.
34.4 Recording Flags
When a recording is stopped, the following markers will be added:
■ Automatically stopped recording: print two columns of “*” at the end of the report.
■ Manually or abnormally stopped recording: print one column of “*” at the end of the report.
34.5 Setting the Recorder
To set the recorder, follow this procedure:
1. Select the
Main Menu quick key → turn to the second page → from the Report column select Record
Setup
.
2. In the
Record Setup menu, select the desired waveform for Waveform 1, Waveform 2 and Waveform 3 in
turn. The recorder can record up to 3 waveforms at a time.
3. Switch on or off
IBP Overlap to enable or disable IBP recordings in the overlapping format.
◆ When the IBP Overlap is enabled: If two or more waveforms in the selected waveforms for recording
are IBP waveforms, the IBP waveforms will be recorded in the overlapping format.
◆ When the IBP Overlap is disabled: IBP waveforms will be recorded normally.
4. Set the
Length for real-time recording. After starting a real-time recording, the recording time depends on
your monitor’s settings.
5. Set the
Interval for timed recordings. Timed recordings start automatically at preset intervals.
6. Set the
Paper Speed. This setting is for all recordings containing waveforms.
34.6 Clearing Recording Tasks
To clear recording tasks, follow this procedure:
1. Select the
Main Menu quick key → turn to the second page → from the Report column select Record
Setup
.
2. In the
Record Setup menu, select Clear All Tasks. All queued recording tasks are cleared and the current
recording is stopped.

Mindray BeneVision N22 Specifications

General

Brand	Mindray
Model	BeneVision N22
Category	Monitor
Language	English