3 - 6 BeneVision N22/N19 Patient Monitor Operator’s Manual
3.6.1 On-screen Symbols
The following table lists the on-screen symbols displayed on the system status information area:
(7) Parameter numerics area: displays parameter values, alarm limits, and alarm status. Selecting a parameter
numeric block enters corresponding parameter menu. For more information, see • ECG is always switched on.
You cannot switched it off..
(8) Parameter numerics/waveform area: displays parameter values and waveforms.
(9) Quick key area: displays quick keys.
Symbol Description Symbol Description
Adult, male Adult, female
Pediatric, male Pediatric, female
Neonate, male Neonate, female
Wireless network is connected. The solid part
indicates network signal strength.
Wireless network is not connected.
Wired network is connected. Wired network is not connected.
All the alarms are paused. Individual physiological alarms are turned off
or the monitor is in the alarm off status.
Audible alarm tones are paused. Audible alarm tones are turned off
Alarms are acknowledged and the alarm
system is reset.
The battery works correctly. The green
portion represents the remaining charge.
The battery has low power and needs to be
charged.
The battery has critically low charge and
needs to be charged immediately. Otherwise,
the monitor will soon automatically shut
down.
The battery is being charged. No battery is installed.