Omron FQ2-S/CH Series

Reading with OCR
FQ2-S/CH User’s Manual
163
4
Setting Up Inspections
Set Code Data using PC
Since the Code data file is complicated, it is best to edit it using a PC. Once an empty CSV file is saved , edited
on a PC and then re-loaded, it can most efficiently be used.
Save the Code Data
Create an empty file for editing with PC.
If the Code data has already been set in Sensor, a file having the settings will be saved.
［ Setup ］−［ Save to file ］−［ Setting ］ tub
5 Select the code file (CSV format) to be loaded in the file selection screen, and click [OK].The
code file is loaded and displayed on the screen.
6 Click [Save].
1 Touch [Code data].
2 Touch the code data number you wish to
save.