Omron FQ2-S/CH Series

Calculations and Judgments Using Inspection Item Data
FQ2-S/CH User’s Manual
331
4
Setting Up Inspections
Reflecting the Judgment Results for Expressions to the Overall Judgment Results
You can specify whether to reflect the judgment results of a calculation in the overall judgment.
(The Default is to reflect them.)
[Inspect] − [Calculation] − [Details] Tab Page − [Output parameter] − [Reflect]
Inspection Item Data That Can Be Used in Expressions
Inspection item Data name Expression
text string
Data range Default
Filter
(FQ2-S1/S2/S3/S4/CH) Judgement JG
−2: No judgement (not measured)
0: Judgement is OK
−1: Judgement is NG
−2
Shape Sear. pos. comp.
(FQ2-S1/S2/S3/S4/CH)
Judgement JG
−2: No judgement (not measured)
0: Judgement is OK
−1: Judgement is NG
−2
Scroll X DX −99999.9999 to 99999.9999 0
Scroll Y DY −99999.9999 to 99999.9999 0
Scroll θ DT −180 to 180 0
Position X X −99999.9999 to 99999.9999 0
Position Y Y −99999.9999 to 99999.9999 0
Angle TH −180 to 180 0
Reference X SX −99999.9999 to 99999.9999 0
Reference Y SY −99999.9999 to 99999.9999 0
Reference angle ST −180 to 180 0
Correlation CR 0 to 100 0
Search position comp.
(FQ2-S1/S2/S3/S4/CH)
Judgement JG
−2: No judgement (not measured)
0: Judgement is OK
−1: Judgement is NG
−2
Scroll X DX −99999.9999 to 99999.9999 0
Scroll Y DY −99999.9999 to 99999.9999 0
Position X X −99999.9999 to 99999.9999 0
Position Y Y −99999.9999 to 99999.9999 0
Reference X SX −99999.9999 to 99999.9999 0
Reference Y SY −99999.9999 to 99999.9999 0
Correlation CR 0 to 100 0
Edge position comp.
(FQ2-S1/S2/S3/S4/CH)
Judgement JG
−2: No judgement (not measured)
0: Judgement is OK
−1: Judgement is NG
−2
Scroll X DX −99999.9999 to 99999.9999 0
Scroll Y DY −99999.9999 to 99999.9999 0
Ref. position X X −99999.9999 to 99999.9999 0
Ref. position Y Y −99999.9999 to 99999.9999 0
Reference X SX −99999.9999 to 99999.9999 0
Reference Y SY −99999.9999 to 99999.9999 0