Logging Measurement Data and Image Data
404
FQ2-S/CH User’s Manual
The file storage locations and file format are given in the following table.
*1: Files are stored in the following folder when the PC Tool is used.
\My Documents\OMRON FQ\SDCard
*2: You can add a character string to the beginning of the file name.
*3: "n" is a serial number that is added when images are logged at the same time.
*4: You can change the "img" at the beginning of the file name.
*5: You can add a character string to the beginning of the file name,
*6: Measurement ID is a value equal to the measurement count minus 1. When launching the FQ2, the count starts from zero.
• File format
Statistical data : The data is saved in the following CSV format.
Number of measurements, number of OKs, number of NGs, OK rate, NG rate (delimiter)
Image data : Image data is saved in a special format for OMRON Sensors.
(The file name extension is IFZ.)
Measurement data : Measurement data is saved in CSV format.
2
The following display will appear if [Logging im-
age] is pressed.
Select whether to save the most recently logged
image or to save all of the image data that is logged
in the Sensor.
Item Storage location File name
Statistical data
\sensor_name\LOGDATA
*1
YYYY_MM_DD-HH_MM_SS_record.CSV
*2
Example: The following name would be used for measurements
performed at 10:10:21 pm on May 10, 2012: 2012_05_10-
22_10_21_record.CSV
Logging data
(measurement data)
Logging image
(image data)
\sensor_name\LOGIMAGE
*1
img_Scn0**_YYYY_MM_DD-HH_MM_SS(n)_
MeasurementID_OverallJudgementResult.IFZ
*3*4*5
Example: The following name would be used for measurements
performed at 10:10:21 pm on May 10, 2012:
img_2012_05_10-22_10_21(0)_0000_OK.IFZ
,QGH[ 0HDVXUHPHQW 6FHQH1R -XGJH ,2&5 ,2;2
࣭࣭࣭
,-*
=Q- =Q'22
࣭࣭࣭ ࣭࣭࣭
To Next Page
Loading...
