Omron FQ2-S/CH Series

External Reference Parameters
482
FQ2-S/CH User’s Manual
312 Logging
condi-
tions
Data logging switch for
correlation
Set / Get 0: Data logging OFF
1: Data logging ON
1 --- ---
313 Data logging switch for
position X
Set / Get 0: Data logging OFF
1: Data logging ON
1 --- ---
314 Data logging switch for
position Y
Set / Get 0: Data logging OFF
1: Data logging ON
1 --- ---
315 Data logging switch for
measurement angle
Set / Get 0: Data logging OFF
1: Data logging ON
1 --- ---
321 Data logging switch for
detection count
Set / Get 0: Data logging OFF
1: Data logging ON
1 --- ---
700 Display
settings
Correlation display Set / Get 0: Display
1: Do not display
0 --- ---
701 Position X display Set / Get 0: Display
1: Do not display
0 --- ---
702 Position Y display Set / Get 0: Display
1: Do not display
0 --- ---
703 Measurement angle
display
Set / Get 0: Display
1: Do not display
0 --- ---
704 Count display Set / Get 0: Display
1: Do not display
0 --- ---
800 Position X display pat-
tern
Set / Get 0: Absolute value
1: Relative value
0 --- ---
801 Position Y display pat-
tern
Set / Get 0: Absolute value
1: Relative value
0 --- ---
802 Measurement angle
display pattern
Set / Get 0: Absolute value
1: Relative value
0 --- ---
External
refer-
ence
number
Category Data name
Set / Get
Data range Default Expression
text string
Logged data/
Judgement
parameter