Adjusting the Images That Were Taken
92
FQ2-S/CH User’s Manual
Specify the Camera image for the first filter item for image processing.
If you execute more than one filter item for the image, set the source image for the other filter items to the previous
image. Also, you can perform image processing with filter items only to enable processing with position compensa-
tion items.
In that case, only the position information from position compensation is applied to the image to be measured.
For details, refer to Using Filter Items for Processing with Position Compensation Items on page 106.
(The image that is taken by the Camera.)
0: Median (filter item)
Source image: Camera image [Camera]
1: Dilate (filter item)
Source image: Previous image [Prev.]
2: Search Position Compensation (position compensation item)
Source image: Previous image [Prev.]
Image
adjustment
Camera image
Processed
image
(process 0)
Image is taken on TRIG signal.
Processed image
(processes 0 and
1)
Processed image
(processes 0, 1,
and 2)
Measurements are performed
with inspection items.
To Next Page
Loading...
