Precor AMT Series User Manual

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Page 66
Brake Test
AMT, RBK,
UBK, EFX
1 Touch
Brake Test
, then Touch
START
.
2 Use the machine control paddle to change
the resistance up and down. The
resistance changes will be displayed in
power bits.
3 Touch STOP to end the test. Touch 
BACK to Systems Test.
Battery Test
AMT, RBK,
UBK, EFX
1 Touch
Battery Test
, and then Touch
START.
2 The console will display the voltage of
the battery.
3 Touch STOP to end the test. Touch 
BACK to Systems Test.
SPM
AMT, EFX
1 Touch
SPM Test
, and then
START
.
2 The console will display Pulse. The
pulse is showing a count of zero
crossings from the generator. SPM shows
a software averaged version of pulse.
An averaged pulse per minute will
display as Minimum and a Maximum pulse.
3 Touch STOP to end the test. Touch 
BACK to exit to Systems Tests.
RPM Test
RBK, EFX
1 Touch
RPM Test
, and then
START
.
2 The console will display Pulse. The
pulse is showing a count of zero
crossings from the generator. RPM shows
a software averaged version of pulse.
3 Touch STOP to end the test. Touch BACK
to exit to Systems Test.
CrossRamp
EFX Only
1 Touch
CrossRamp Test
, and then Touch
START.
2 Use the machine control paddle to change
the CrossRamp. The console will display
the analog to digital (A/D) and Glitches
incline position number. Available
battery voltage to the lift system will
be displayed.
3 Touch STOP to end the test. Touch 
BACK to Systems Test.

Precor AMT Series Specifications

General

Brand	Precor
Model	AMT Series
Category	Elliptical Trainer
Language	English