Rohde & Schwarz MXO 4 Series - Page 167

TriggerMXO 4 Series
167User Manual 1335.5337.02 ─ 07
Figure 7-3: Set state for pattern trigger
Source: channel states
Set the state for each channel. For the state trigger, the clock source is indicated and
does not get a state.
Remote command:
TRIGger:EVENt<ev>:STATe:QUALify:ANALog:CHAN<n>:HLX on page 561
TRIGger:EVENt<ev>:PATTern:QUALify:ANALog:CHAN<n>:HLX on page 563
Threshold
Set the threshold for each channel.
Remote command:
TRIGger:EVENt<ev>:LEVel<n>[:VALue] on page 541
Set all
Sets all channels to the selected state.
State Operator
Defines the logic combination of the channels and their states.
●
"AND": logical AND, conjunctive combination
●
"OR": logical OR, disjunctive combination
Remote command:
TRIGger:EVENt<ev>:STATe:QUALify:LOGic on page 562
TRIGger:EVENt<ev>:PATTern:QUALify:LOGic on page 564
Trigger types