Protocol analysisMXO 4 Series
373User Manual 1335.5337.02 ─ 07
Decode layer
Selects the decode layer.
Decoding is performed in several steps, and the end results are presented in the
decode table. The decode layer selects an interim step for which the decoding result is
shown in the honeycomb display.
Show symbols
You can load symbol lists, and activate its usage for decoding. As a result, an addi-
tional "Symbol" column appears in the "Decode results" table, containing the symbolic
label.
Symbol lists for CAN are available in DBC and CSV format, see CAN symbols.
Remote command:
SBUS<sb>:CAN:SYMBols on page 766
SBUS<sb>:CAN:NEWList on page 767
CAN (option R&S
MXO4-K520)
To Next Page
Loading...
