Rohde & Schwarz MXO 4 Series - Page 578

Remote control commandsMXO 4 Series
578User Manual 1335.5337.02 ─ 07
Parameters:
<RelativeStop> Range: 0 to 100
Increment: 0.1
*RST: 100
Default unit: %
Example: See Chapter 17.4.1, "SmartGrid layout with zoom", on page 474.
Usage: Asynchronous command
Manual operation: See "Start Stop" on page 179
LAYout<ly>:ZOOM<zo>:HORizontal:RELative:WIDTh
<RelativeSpan>
Defines the width of the zoom area in relative values.
Suffix:
<ly>
.
1...4, index of the SmartGrid layout
<zo> 1...4, index of the zoom
Parameters:
<RelativeSpan> Range: 1E-15 to 100
Increment: 0.1
*RST: 1
Default unit: %
Usage: Asynchronous command
LAYout<ly>:ZOOM<zo>:SOURce <Diagram>
Indicates which of the waveform diagrams is selected for zooming. The number is dis-
played on the screen in the middle of each diagram.
Suffix:
<ly>
.
1...4, index of the SmartGrid layout
<zo> 1...4, index of the zoom
Parameters:
<Diagram> Index of the diagram, which is zoomed.
Example: See Chapter 17.4.1, "SmartGrid layout with zoom", on page 474.
Usage: Asynchronous command
Manual operation: See "Diagram" on page 178
LAYout<ly>:ZOOM<zo>:VERTical:ABSolute:POSition <Center>
Defines the y-value of the centerpoint of the zoom area in absolute values.
Suffix:
<ly>
.
1...4, index of the SmartGrid layout
<zo> 1...4, index of the zoom
Waveform analysis