Rohde & Schwarz MXO 4 Series - Page 579

Remote control commandsMXO 4 Series
579User Manual 1335.5337.02 ─ 07
Parameters:
<Center> Range: -1E+26 to 1E+26
Increment: 0.01
*RST: 0.01
Usage: Asynchronous command
Manual operation: See "Position range" on page 179
LAYout<ly>:ZOOM<zo>:VERTical:ABSolute:RANGe <Span>
LAYout<ly>:ZOOM<zo>:VERTical:ABSolute:SPAN <Span>
Defines the height of the zoom area in absolute values.
Suffix:
<ly>
.
1...4, index of the SmartGrid layout
<zo> 1...4, index of the zoom
Parameters:
<Span> Range: 0 to 1E+26
Increment: 0.01
*RST: 0.01
Usage: Asynchronous command
Manual operation: See "Position range" on page 179
LAYout<ly>:ZOOM<zo>:VERTical:ABSolute:STARt <Start>
Defines the lower limit of the zoom area on the y-axis in absolute values.
Suffix:
<ly>
.
1...4, index of the SmartGrid layout
<zo> 1...4, index of the zoom
Parameters:
<Start> Range: -1E+26 to 1E+26
Increment: 0.01
*RST: 0.01
Usage: Asynchronous command
Manual operation: See "Start Stop" on page 179
LAYout<ly>:ZOOM<zo>:VERTical:ABSolute:STOP <Stop>
Defines the upper limit of the zoom area on the y-axis in absolute values.
Suffix:
<ly>
.
1...4, index of the SmartGrid layout
<zo> 1...4, index of the zoom
Waveform analysis