Rohde & Schwarz MXO 4 Series - Page 713

Remote control commandsMXO 4 Series
713User Manual 1335.5337.02 ─ 07
SBUS<sb>:SPI:MISO:POSition <SPI MISO position>
Sets the vertical position of the MISO signal.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<SPI MISO position>
Usage: Asynchronous command
SBUS<sb>:SPI:MISO:SCALe <SPI MISO scale>
Set the vertical scale of the MISO signal.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<SPI MISO scale>
Usage: Asynchronous command
SBUS<sb>:SPI:MOSI:POSition <SPI MISO position>
Sets the vertical position of the MOSI signal.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<SPI MISO position>
Usage: Asynchronous command
SBUS<sb>:SPI:MOSI:SCALe <SPI MOSI scale>
Set the vertical scale of the MOSI signal.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<SPI MOSI scale>
Usage: Asynchronous command
17.16.2.2 Filter
SBUS<sb>:SPI:FILTer:CHKall......................................................................................... 714
SBUS<sb>:SPI:FILTer:CLR.............................................................................................714
SBUS<sb>:SPI:FILTer:INVert.......................................................................................... 714
SBUS<sb>:SPI:FILTer:RST.............................................................................................715
Protocols