DocID024597 Rev 5 1303/1830
RM0351 Universal synchronous asynchronous receiver transmitter (USART)
1411
• Communication control/error detection flags
• Parity control:
– Transmits parity bit
– Checks parity of received data byte
• Fourteen interrupt sources with flags
• Multiprocessor communications
The USART enters mute mode if the address does not match.
• Wakeup from mute mode (by idle line detection or address mark detection)
40.3 USART extended features
• LIN master synchronous break send capability and LIN slave break detection capability
– 13-bit break generation and 10/11-bit break detection when USART is hardware
configured for LIN
• IrDA SIR encoder decoder supporting 3/16 bit duration for normal mode
• Smartcard mode
– Supports the T=0 and T=1 asynchronous protocols for smartcards as defined in
the ISO/IEC 7816-3 standard
– 0.5 and 1.5 stop bits for smartcard operation
• Support for ModBus communication
– Timeout feature
– CR/LF character recognition
To Next Page
Loading...
Need help?
General
