Analog-to-digital converters (ADC) RM0351
558/1830 DocID024597 Rev 5
Oversampling regular and Injected channels
It is possible to have both ROVSE and JOVSE bits set. In this case, the regular
oversampling mode is forced to resumed mode (ROVSM bit ignored), as represented on
Figure 115 below.
Figure 115. Regular and injected oversampling modes used simultaneously
Triggered regular oversampling with injected conversions
It is possible to have triggered regular mode with injected conversions. In this case, the
injected mode oversampling mode must be disabled, and the ROVSM bit is ignored
(resumed mode is forced). The JOVSE bit must be reset. The behavior is represented on
Figure 116 below.
Figure 116. Triggered regular oversampling with injection
069
2YHUVDPSOLQJ
UHVXPHG
5HJXODUFKDQQHOV
&K0
&K0
&K1
&K1
&K1
&K1
&K0
&K0
2YHUVDPSOLQJ
DERUWHG
&K-
&K-
7ULJJHU
,QMHFWHGFKDQQHOV
5296( -296( 52960 ;75296
$ERUW
-(2&
&K-
&K-
069
2YHUVDPSOLQJ
UHVXPHG
5HJXODUFKDQQHOV
&K1
&K1
&K1
&K1
&K- &K.
7ULJJHU
,QMHFWHGFKDQQHOV
5296( -296( 52960 ;75296
$ERUW
7ULJJHU 7ULJJHU 7ULJJHU 7ULJJHU 7ULJJHU
To Next Page
Loading...
Need help?
General
