Digital-to-analog converter (DAC) RM0351
632/1830 DocID024597 Rev 5
19.4 DAC low-power modes
Table 125. Effect of low-power modes on DAC
Mode Description
Sleep No effect, DAC used with DMA
Low-power run No effect.
Low-power sleep No effect. DAC used with DMA.
Stop 0 / Stop 1
DAC remains active with a static value, if sample and hold mode is
selected using LSI clock
Stop 2
The DAC registers content is kept. The DAC must be disabled before
entering Stop 2.
Standby
The DAC peripheral is powered down and must be reinitialized after exiting
Standby or Shutdown mode.
Shutdown
To Next Page
Loading...
Need help?
General
