RESULT INTERPRETATION/REPORTS, Stored Data, List Display
Sysmex SF-3000 Operator's Manual -- Revised September 1995 4-17
4) Indications
The following indications appear on the right of analysis data:
① ! (backlit in red):
Indicates that the data is outside the Critical Limits.
➁ * (backlit in red):
Indicates that the data is outside the Linearity Limits.
➂ +, – (backlit in red):
Indicates that the data is outside the Sampler Stop Limits.
➃ * (backlit in yellow):
Indicates that the data is unreliable because of an abnormality detected in the
sample.
⑤ +, – (backlit in yellow):
Indicates that the data is outside the Mark Limits.
NOTE: The above indications are listed on the priority basis.
To Next Page
Loading...
