SYSMEX SF-3000 User Manual

SYSTEM SETUP
11-44 Sysmex SF-3000 Operator's Manual -- Revised September 1995
6.1 Date/Time
The SF-3000 has a built-in clock that is powered by an internal battery whenever the
power is turned off or interrupted, so that the date and time need only be reset
occasionally.
To set date and time:
(1) Press [Date/Time] key in the General Set Up submenu.
The Date/Time setting screen containing the current date and time and numeric keys
will appear.
(2) Move the green cursor with the [↑] and [↓] keys to select an item.
Year
Date/
Time
Units
Normal
Range
Date
Format
Timer
Mode
Password More Return
DP:1234567890123
Sysmex
XM HC GP DP SU
Ready
Manual Mode Next No.1234567890123
Sampler
Month
Date
Time
:
:
:
:
1 9 9 5
6
2 9
1 1 : 3 5
( 2 4 Hours )
DATE
TIME
Year
ENTER
QUIT
C
78 9
456
123
0
1995
/
↑
↓
Figure 11-37: Date/Time Setting Screen
(3) Input date and time using the numeric keys and press [ENTER].
The current date or time is displayed above the numeric keys. The time appears in
"hour : minute : second" format. To set time, input "hours" using numeric key,
press [:] key, then input "minutes".
NOTE: • When the time is selected for setting, [:] key will be added in the
numeric keypads window.
• Time must be entered as a 24-hour system.
• "Seconds" can be entered and set but is not displayed or printed.
(4) Press [QUIT] key to exit the program. The confirmation message will appear.
Press the appropriate key [Continue], [Set] or [Cancel].
Continue : To return to Date/Time setting screen so that setting can be
continued.
Set : To save the new settings. Program ends.
Cancel : To cancel the new settings. Program ends.

SYSMEX SF-3000 Specifications

General

Brand	SYSMEX
Model	SF-3000
Category	Measuring Instruments
Language	English