SYSMEX SF-3000 User Manual

SYSTEM SETUP
11-56 Sysmex SF-3000 Operator's Manual -- Revised September 1995
6.9 Work List
Use this program to set the use of the Work List, and to set the key word for order
inquiry.
To execute work list settings:
(1) Press [Work List] key in the General Set Up submenu. The Input Password
window will appear.
(2) Enter the password and press [ENTER] key.
The Work List setting screen will appear, containing the current settings. A "√"
mark is displayed for the selected item.
< Work List >
Quit
Return
DP:1234567890123
Sysmex
XM HC GP DP SU
Ready
Manual Mode Next No.1234567890123
Sampler
More
ID
Reader
Blood
Sensor
Work
List
Work List
Key word
Used
Tube Position
Not Used
Sample ID No.
√
√
Figure 11-46: Work List Setting Window
Work List : Select "Used" or "Not Used".
(The factory setting is "Not Used".)
Keyword : Select "Tube Position" or "Sample ID No." for the key word for
order inquiry (The factory setting is "Tube Position".)
(3) Press [Quit] key to exit the program. The confirmation message will appear. Press
the appropriate key [Continue], [Set] or [Cancel].
Continue : To return to Work List setting screen so that setting can be
continued.
Set : To save the new settings. Program ends.
Cancel : To cancel the new settings. Program ends.

SYSMEX SF-3000 Specifications

General

Brand	SYSMEX
Model	SF-3000
Category	Measuring Instruments
Language	English