SYSMEX SF-3000 - Outputting the Cal. History

CALIBRATION
7-20 Sysmex SF-3000 Operator's Manual --- Revised September 1995
4.3 Outputting the Cal. History
To obtain the printout of the calibration history, use the "Hard Copy" program as below.
(1) Display the calibration history on the LCD.
(2) Press the [Sysmex] keypad in the upper left corner of the screen. The Sysmex
submenu window will appear.
6
4
5
Delete
Date
1
2
7
8
9
10
Cancel
< Cal. History >
HGB HCT
1995/08/20 10:15 99.4 101.0
3
1995/10/31 13:45 100.2 99.8
X
M DP:1234567890123
Sysmex
Ready
Sampler
Manual Mode Next No.1234567890123
HC GP DP SU
Return
Cal.
History
HGB/HCT
Manual
HGB/HCT
Auto
↑
↓
Hard
Copy
Error
Log
Cancel
Figure 7-20: Sysmex Submenu Window
(3) Press [Hard Copy] key. The copy of the calibration history display will be output
to the Graphic Printer. (Refer to Chapter 1, Section 9.3: Hard Copy.)