SYSMEX SF-3000 User Manual

WORK LIST
3-10 Sysmex SF-3000 Operator's Manual -- Revised July 1996
4. DELETE
You can delete specified order information registered in memory. If you select this
menu, the "Delete" submenu appears, enabling you to choose "Current", "Marked" or
"All" data.
To delete order information:
(1) Press [Delete] keypad. The Delete window appears as shown in Figure 3-11.
Work
RACK-TUBE
Order Repeat
Output Delete
Down
Load
SAMPLE
List
Return
DP:1234567890123
Sysmex
XM HC GP DP SU
Ready
Manual Mode Next No.1234567890123
Sampler
0001-01
0001-02
0001-03
0001-04
0001-05
0001-06
0001-07
0001-08
0001-09
0001-10
0002-01
0002-02
0002-03
0002-04
0002-05
123-456
Delete
Current
A l l
Cancel
123-456
123-456
123-456
123-456
123-456
123-456
123-456
123-456
123-456
123-456
123-456
123-456
123-456
123-456
[0/15]
Marked
Figure 3-11: Delete Window
(2) Press the desired keypad to specify the data to be deleted.
(3) Press [OK] key to delete the data. Refer to the following sections for the
procedure.
4.1 All Data
Use this program to delete all the order information.
(1) Display the Work List on the screen.
(2) Press [Delete] key to display the Delete window.
(3) Press [All] key. The Delete Confirmation window will appear as shown in Figure
3-12 below.

SYSMEX SF-3000 Specifications

General

Brand	SYSMEX
Model	SF-3000
Category	Measuring Instruments
Language	English