SYSMEX SF-3000 - General Set up

SYSTEM SETUP
Sysmex SF-3000 Operator's Manual -- Revised March 1996 11-41
6. GENERAL SET UP
Use this program to set SF-3000 system status.
To execute General Set Up programs:
(1) Press [Settings] key in the root menu. The Settings second menu will be
displayed.
NOTE: If the [Settings] keypad is not displayed on the LCD, press [More]
key to change the displayed root menu.
DP:1234567890123
Auto
Mgmt.
Data
Criteria
Config.
Print
Set Value
General
Set Up
Flag
System
Return
Sysmex
XM HC GP DP SU
Ready Manual Mode Next No.1234567890123
Sampler
• Setting •
Figure 11-33: Settings Second Menu Screen
(2) Press [General Set Up] key in the second menu. The password input screen will
appear.
NOTE: When the [Date/Time] or [Date Format] key is pressed, the
password entry is not required.