SYSMEX SF-3000 User Manual

QUALITY CONTROL
Sysmex SF-3000 Operator's Manual -- Revised September 1995 6-13
6. TARGET/LIMIT
This is used to set the QC Target, Limit# (%) values and control blood information
manually or by down loading from a floppy disk (FD). Additionally, all the current QC
file target and limit# (%) values are displayed for checking.
6.1 Display
Currently memorized X /L-J file lot Nos., expiration dates, and targets/limit# (%) are
displayed in this reference list. To register targets, limit# (%) and control blood
information, the file name must be specified here beforehand.
(1) Press [QC] to display QC second menu.
(2) Press [Target/Limit] keypad from the second menu. The first page of QC File
Information List will be displayed.
Q C
FILE
Help Setting
Read
FD
INFO. RBC HGB HCT
Return
DP:1234567890123
Sysmex
XM HC GP DP SU
Ready
Manual Mode Next No.1234567890123
Sampler
XM
No. 1
No. 2
No. 3
No. 4
No. 5
No. 6
No. 7
30070107
1996/05/10
< Target / Limit List >
MCV MCH MCHC
TARGET
LIMIT#
TARGET
LIMIT#
TARGET
LIMIT#
TARGET
LIMIT#
TARGET
LIMIT#
TARGET
LIMIT#
TARGET
LIMIT#
TARGET
LIMIT#
465
14
465
14
13.9
0.5
13.9
0.5
39.2
1.6
84.3
3.4
29.9
1.5
35.5
1.8
39.2
1.6
84.3
3.4
29.9
1.5
35.5
1.8
Lot
Into.
↑
↓
→
←
GP
List
Figure 6-10: QC File Information Screen (P1: RBC)
(3) Use the [↑] and [↓] keys to select a file.
NOTE: Pressing the [↓] key when the cursor has reached the bottom of the
screen will make the display to scroll up by one file number. (The
cursor will appear at the bottom of the screen.) However, if the
cursor is on File No. 12, no upward scrolling will occur.
Pressing the [↑] key when the cursor has reached the top of the
screen will make the display to scroll down by one file number. (The
cursor will appear at the top of the screen.) However, if the cursor is
on X
M, no downward scrolling will occur.

SYSMEX SF-3000 Specifications

General

Brand	SYSMEX
Model	SF-3000
Category	Measuring Instruments
Language	English