SYSMEX SF-3000 User Manual

FUNCTIONAL DESCRIPTIONS, Main Unit
10-22 Sysmex SF-3000 Operator's Manual -- Revised September 1995
9.3 Right Side
(1) Floppy Disk Drive
(2) Fuse 1
(3) Power Switch
(4) Power Connector
(5) Fuse 2
(6) Pneumatic Power Outlet
Figure 10-19: Main Unit – Right Side View
(1) 3.5-Inch Floppy Disk Drive
Uses 3.5 inch 2HD (double sided high density) type floppy disks.
CAUTION: The floppy disks for the SF-3000 can be used only on this
instrument. If the disks are used on other instruments or
computers, the data may be unreadable on the SF-3000.
(2) Fuse 1
This is an over-current protection fuse for SF-3000 including the Pneumatic Unit.
Replace with provided time lag type fuse. The rating will be different depending
on the instrument specification.
Specification Part No. Description Fuse
Type
117 VAC 266-5108-7 Fuse 250V8A ST4-8A-N1 Time Lag
220/240 VAC 266-5297-4 Fuse 250V4A No. 19195 Time Lag
(3) Power Switch
Turns the Main Unit power ON and OFF.
CAUTION: Do not turn it ON and OFF repeatedly in a short period of time.

SYSMEX SF-3000 Specifications

General

Brand	SYSMEX
Model	SF-3000
Category	Measuring Instruments
Language	English