SYSMEX SF-3000 - 3. Informational Headings and Document Conventions; 2. Start-Up Procedures and Operator Checks; 2. SF-3000 Maintenance Check List; 2. Deleting QC Files

Sysmex SF-3000 Operator's Manual -- Revised September 1995
RECEIVING INSTRUCTIONS
The SF-3000 has been thoroughly tested before shipment, and has been packaged
carefully to prevent damage from shipping and handling. Reagents and options have
also been sent and will arrive at approximately the same time as the analyzer. Follow
these guidelines when the system arrives:
• Check to see that the arrows on the sides of the packages are pointing up. If the
arrows do not point up, remark this information on the bill of lading.
• Visually inspect the outside of the package for rips, dents, or possible shipping
damage. Document any sign of damage on the bill of lading, regardless of how
insignificant it may appear. This is for your protection!
• Notify your service representative that the SF-3000 system and its components
have arrived.
• Wait for your service representative to unpack the system and open the packages.
• Follow the unpacking and storage instructions provided on the outside of the
package. Special requirements such as refrigeration are clearly marked on the
outside of the carton and will be included in the unpacking instructions and
package inserts.
WARRANTY INFORMATION
All instruments manufactured by Sysmex® are warranted against defective materials or
workmanship for a period of one year commencing on the installation date at the
customer's required location.
This Warranty does not cover any defect, malfunction, or damage due to:
1. Accident, neglect or willful mistreatment of the product
2. Failure to use, operate, service, or maintain the product in accordance with the
applicable Sysmex Operator's Manual
3. Failure to use the appropriate reagents or chemicals specified for the product