SYSMEX SF-3000 User Manual

CALIBRATION
Sysmex SF-3000 Operator's Manual -- Revised September 1995 7-9
(3) Analyze the samples using the Manual mode.
During analysis, a blue line appears on the analyzed sample number.
If the [Quit] key on the screen is pressed during analysis, the analysis results are
ignored and will not be displayed. Perform analysis again for the sample number.
NOTE: The operator is allowed to reanalyze a sample by moving the cursor to
the sample number for which analysis has already been done.
(4) After the analysis is completed, the results will be displayed and the cursor will
move to the next sample area.
If at least one HGB/HCT values are obtained, the average will automatically be
calculated and displayed in the "Avg." column.
If HGB/HCT reference values have already been entered, the compensation factor
will automatically be calculated and displayed in the "Compensation (%)" column.
DP:1234567890123
Sampler
Manual Mode
XM HC GP DP SU
HGB
1
2
3
4
5
6
7
8
9
10
Reference Analyze Compensation (%)
Avg.
Setting Analyze
Exclude Exe. Cal
Graphic Return
CALIB.
Sysmex
Ready
HGB HGBHCT HCT HCT
< HGB/HCT Auto >
Next No.1234567890123
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
15.9
15.9
15.9
15.9
15.9
15.9
15.9
15.9
15.9
15.9
15.9
39.9
39.9
39.9
39.9
39.9
39.9
39.9
39.9
39.9
39.9
39.940.0
100.1
100.1
100.1
100.1
100.1
100.1
100.1
100.1
100.1
100.1
100.1
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
[ Current ]
HGB 98.1%
HCT 100.1%
↑
↓
Figure 7-9: Sample Analysis Screen (2)
NOTE: To update the [Current] compensation factor with the average found in
the "Compensation (%)" column, use the "Exe.Cal" program.

SYSMEX SF-3000 Specifications

General

Brand	SYSMEX
Model	SF-3000
Category	Measuring Instruments
Language	English