SYSMEX SF-3000 User Manual

SYSTEM SETUP, Peripheral Configuration
11-34 Sysmex SF-3000 Operator's Manual -- Revised September 1995
(6) When [Quit] key is pressed to exit the setting program, the confirmation message
window will appear. Press the appropriate key [Continue], [Set] or [Cancel].
Settings will be finished.
Set
Cancel
Continue
Figure 11-27: End of Setting Window
Continue : To return to the previous screen so that setting can be continued.
Set : To save the new settings. Program ends.
Cancel : To cancel the new settings. Program ends.

SYSMEX SF-3000 Specifications

General

Brand	SYSMEX
Model	SF-3000
Category	Measuring Instruments
Language	English