SYSTEM SETUP
Sysmex SF-3000 Operator's Manual -- Revised September 1995 11-53
ITF : Select either "No" or "MOD-10" for ITF bar-code
(Interleaved 2 of 5) check-digit. (The factory setting is "MOD-10".)
NW7 : Select NW7 bar-code check digit. Options are "No",
"MOD-11", "W-MOD-11", "MOD-16". (The factory
setting is "MOD-11".)
CODE 39 : Select "No" or "MOD-43" for the Code 39 bar-code
check-digit. (The factory setting is "MOD-43".)
JAN : For JAN bar-code check-digit: "MOD-10". (The
factory setting is "MOD-10".)
CODE 11 : For CODE 11 bar-code check-digit: "CODE11". (The
factory setting is "CODE11".)
CODE 128 : For CODE 128 bar-code check-digits:
"MOD-103". (The factory setting is "MOD-103".)
NOTE: For details of bar-code types and check-digits, see A
ppendix C:
Technical Information
.
(4) Press [Quit] key to exit the program. The confirmation message will appear. Press
the appropriate key [Continue], [Set] or [Cancel].
Continue : To return to ID Reader setting screen so that setting can be
continued.
Set : To save the new settings. Program ends.
Cancel : To cancel the new settings. Program ends.
To Next Page
Loading...
