SYSMEX SF-3000 User Manual

SAMPLE PROCESSING, Manual CP Mode Procedures
2-46 Sysmex SF-3000 Operator's Manual -- Revised September 1995
4 . Analyze Sample
(1) Mix the whole blood sample
thoroughly by inverting the tube.
(2) Set the tube in the Manual CP Unit.
(3) Close the Manual CP Unit cover.
(4) Press the Start Switch to start the
analysis.
Figure 2-36: Set Sample in the
Manual CP Unit
After the sample is aspirated, the analysis begins. You can check the status of each stage
of analysis using the Analysis Process screen. To see this screen, press [Status] key in
the root menu. Switch to "P2. Analysis Process" using the [→] and [←] keys.
←
Sysmex
DP:1234567890123
XM HC GP DP CP
Ready
Closed Mode Next No.1234567890123
Sampler
STATUS
< Analysis Process >
Sequence
ID No.
Rack
Aspirate
Dilute
RBC Count
WBC/BASO Count
DIFF Count
RBC Analyze
WBC/BASO Analyze
DIFF Analyze
Edit
Store
1
1234567890122
0000-00
Ð
Ð
Ð
: Entry
: Interruption
: Run
: Finish Abnormal
: Finish Normal
→ Return
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Figure 2-37: Analysis Process Screen (Manual CP/Closed Mode)

SYSMEX SF-3000 Specifications

General

Brand	SYSMEX
Model	SF-3000
Category	Measuring Instruments
Language	English