(b) Rub with a clean cloth to remove the contamination.
SUBTASK 72-00-00-167-033-G00
WARNING
YOU MUST WEAR GLOVES, PROTECTIVE SPLASH GOGGLE, RUBBER
APRON, AND PROTECTIVE SHOES WHEN YOU USE A STEAM CLEANER.
CAUTION
DO NOT KEEP THE STEAM SPRAY IN ONE AREA FOR MUCH TIME WHEN
YOU CLEAN PLASTIC PARTS WITH STEAM.
(3) Use the small capacity steam cleaner, STD-832. You must be careful not to remove paint and
surface coatings while you clean.
(a) To apply the steam, use standard equipment methods.
F. Hydraulic Fluid Removal
SUBTASK 72-00-00-117-063-G00
CAUTION
REMOVE HYDRAULIC FLUID IMMEDIATELY. HYDRAULIC FLUID CAUSES
DAMAGE TO EQUIPMENT.
(1) Remove the hydraulic fluid with a clean cloth.
SUBTASK 72-00-00-117-064-G00
WARNING
DO NOT GET SOLVENTS IN YOUR MOUTH OR EYES, OR ON YOUR SKIN.
DO NOT BREATHE THE FUMES FROM SOLVENTS. PUT ON A RESPIRATOR,
PROTECTIVE SPLASH GOGGLES, AND GLOVES WHEN YOU USE
SOLVENTS. KEEP THE SOLVENTS AWAY FROM SPARKS, FLAME, AND
HEAT. SOLVENTS ARE POISONOUS AND FLAMMABLE. SOLVENTS CAN
CAUSE INJURIES TO PERSONNEL, AND DAMAGE TO EQUIPMENT.
(2) Clean the hydrocarbons with a solvent.
(a) Dry the area with a clean cloth.
SUBTASK 72-00-00-117-065-G00
(3) As an alternative, you can flush the area with water.
G. How to Remove Fire Extinguisher Agents
SUBTASK 72-00-00-127-034-G00
(1) To remove foam fire extinguisher agents from the engine, do the steps that follow:
(a) Wash the area with potable water.
(b) Clean with a brush to remove all the foam agents.
(c) Rinse the area with potable water.
(d) Rub with a clean cloth to remove all water.
SUBTASK 72-00-00-167-035-G00
(2) To remove dry chemical powder agents, do the steps that follow:
767
AIRCRAFT MAINTENANCE MANUAL
CF6-80A SERIES ENGINES
72-00-00
NoC
Page 714
D633T1B7 Aug 22/2017
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ABX 001-007, 011, 012, 016-019, 021, 022, 025, 101,
109, 114, 115, 314-999
To Next Page
Loading...
