(Continued)
Reference Description Specification
B00074 Solvent - Degreasing MIL-PRF-680
(Supersedes P-D-680)
B00679 [C04-035] Alcohol - Isopropyl
D00552 [C02-019] Oil - Engine Lubricating (Refer to the model
specific GE Service Bulletin 79-0001 for CF6,
GEnx, GE90, or GE9X engines)
D50017 [C02-071] Compound - Antiseize And Lubricating - Pure
Nickel Special Grade
GE Spec D6Y28C1 or
A50TF198
D50043 [C02-058] Compound - Antiseize, Acheson GP460 (For
Threaded Fasteners 0.250 Inches Diameter
Or Larger, C02-079 Is An Alternative)
GE A50TF201 Class A
D50067 [C02-001] Compound - Anti-seize AMS 2518
G50471 Compound - Thread Sealant (Loctite 592)
D. Location Zones
Zone Area
412 Left Powerplant Nose Cowl
422 Right Powerplant Nose Cowl
E. Procedure
(Figure 202)
SUBTASK 72-31-00-012-021-G00
(1) Do the task to remove the No. 1 bearing manifold.
SUBTASK 72-31-00-022-014-G00
(2) Do the steps that follow to remove the center vent tube (Figure 202):
(a) Use the retaining ring pliers, SPL-12858 to remove the locking tab ring at the coupling
nut.
(b) Use the center vent tube wrench, SPL-6711 for the center vent duct to remove the center
vent tube from the fan mid shaft.
NOTE: You have to attach one or more 3/4-inch drive extensions to the wrench. A total
extension length of 2.5-3.0 feet (760-900 mm) is necessary.
(c) Remove and discard the packings from the three integral supports on the center vent
tube.
(d) Remove and discard the four vespel inserts.
ABX 001-007, 011, 012, 016-019, 021, 022, 025, 101, 109, 114, 115, 314-999 PRE SB CF6-80A-72-0084
(e) If the center vent tube has an extension, remove and discard the two preformed packings
(or static seals) at the rear of the center vent tube.
ABX 001-007, 011, 012, 016-019, 021, 022, 025, 101, 109, 114, 115, 314-999 POST SB
CF6-80A-72-0084
(f) If the center vent tube does not have an extension, remove and discard one preformed
packing at the rear end of the center vent tube.
ABX 001-007, 011, 012, 016-019, 021, 022, 025, 101, 109, 114, 115, 314-999
SUBTASK 72-31-00-212-015-G00
(3) Look for puddles of oil in the fan midshaft (Figure 202).
767
AIRCRAFT MAINTENANCE MANUAL
CF6-80A SERIES ENGINES
72-31-00
NoC
Page 205
D633T1B7 Dec 22/2018
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ABX 001-007, 011, 012, 016-019, 021, 022, 025, 101,
109, 114, 115, 314-999