Grandstream Networks UCM6510 - Page 100

P a g e | 99
UCM6510 IP PBX User Manual
Version 1.0.20.31
Domain
Specify the domain name to be used in the Email when using type “MTA”.
Server
Specify the SMTP server when using type “Client”. For example, if using
Gmail as the SMTP server, you can configure it as smtp.gmail.com:465.
Username
Username is required when using type “Client”. This is typically the email
address.
Password
Password for the entered Username.
Enable Email-to-Fax
Toggles the Email-to-Fax feature.
If enabled, the UCM will monitor the configured email inbox (using provided
[Username] and [Password]) for emails with the subject "SendFaxMail To
XXX". Example : SendFaxMail To 7200
The UCM will extract the attachments of detected emails and send it to the
XXX extension by fax.
The attachment must be in PDF/TIF/TIFF format.
Note: This field will appear when using Type “Client”.
Email-to-Fax
Blacklist/Whitelist
Enables Email-to-Fax Blacklist/Whitelist functionality.
Email-to-Fax Subject
Specify the Email subject format for fax sending, the subject can be either
"SendFaxMail To XXX" or “XXX" with XXX the fax number.
Internal Blacklist/Whitelist
Specify the Email address blacklist/whitelist for local extensions. This
feature prevents faxing from unauthorized email addresses. The internal
list includes only contacts with local extensions
External Blacklist/Whitelist
Specify the Email address blacklist/whitelist for non-local contacts. This
feature prevents faxing from unauthorized email addresses. The external
list is for non-local contacts.
Note: Multiple addresses can be separated with semicolon (;) i.e.
" XXX;YYY ".
POP/POP3 Server Address
Configure the POP/POP3 server address for the configured username
Example: pop.gmail.com
POP/POP3 Server Port
Configure the POP/POP3 server port for the configured username
Example: 995
Display Name
Specify the display name in the FROM header in the Email.
Sender
Specify the sender’s Email address.
For example: pbx@example.mycompany.com.