EasyManuals Logo

Grandstream Networks UCM6510 User Manual

Grandstream Networks UCM6510
483 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #357 background imageLoading...
Page #357 background image
P a g e | 356
UCM6510 IP PBX User Manual
Version 1.0.20.31
Call Forward Unconditional
Activate
Default Code: *72
Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Unconditional
Deactivate
Default Code: *73
Remote Call Forward Enable
If enabled, this option will allow specific extensions to dial the
remote call forwarding feature codes to set call forwarding for
any extension.
Remote Call Forward Busy
Enable
Default Code: *65
Enter the code and follow the voice prompt to set the remote
extension number where you want to enable Call Forward Busy
and the target destination.
Remote Call Forward Busy
Disable
Default Code: *651
Enter the code and follow the voice prompt to set the remote
extension number where you want to disable the Call Forward
Busy.
Remote Call Forward No Answer
Enable
Default Code: *66
Enter the code and follow the voice prompt to set the remote
extension number where you want to enable Call Forward No
Answer and the target destination.
Remote Call Forward No Answer
Disable
Default Code: *661
Enter the code and follow the voice prompt to set the remote
extension number where you want to disable the Call Forward
No Answer.
Remote Call Forward
Unconditional Enable
Default Code: *67
Enter the code and follow the voice prompt to set the remote
extension number where you want to enable Call Forward
Unconditional and the target destination.
Remote Call Forward
Unconditional Disable
Default Code: *671
Enter the code and follow the voice prompt to set the remote
extension number where you want to disable the Call Forward
Unconditional.
Remote Call Forward Whitelist
Only the Extensions selected in this whitelist can configure call
forwarding for any extension via feature codes.
Feature Codes
Voicemail Access Code
Default Code: *98
Enter *98 and follow the voice prompt. Alternatively, dial *98
followed by the extension and pound (#) to immediately access
the entered extension's voicemail box.

Table of Contents

Other manuals for Grandstream Networks UCM6510

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks UCM6510 and is the answer not in the manual?

Grandstream Networks UCM6510 Specifications

General IconGeneral
BrandGrandstream Networks
ModelUCM6510
CategoryPBX
LanguageEnglish

Related product manuals