1086 HEIDENHAIN Technical Manual MANUALplus 620
Preliminary
input values
Enter the following temporary input values when you begin commissioning:
Machine parameters in the configuration editor and
preliminary input value
Meaning
System
CfgFilter
defaultPosition
shape: Triangle
frequency: 40
defaultCutterLoc: Deactivated
Type of nominal position value filter
Frequency of the position filter
CLP filter: Deactivated
(delete from configuration)
Channels
ChannelSettings
CH_NC
CfgLaPath
minPathFeed: 0
minCornerFeed: 0
maxPathJerk: 5
maxG1Feed: 99,999
pathTolerance: 0.01
maxPathYank: 1000000
Minimum feed rate on the path
Minimum feed rate at corners
Maximum jerk on the path
Max. machining feed rate
Tolerance for contour transitions
Maximum yank on the path
To Next Page
Loading...
