January 2012 6.22 Diagnosis with the Online Monitor (OLM) 1203
Hardware port
states (HW-Ports)
The HW-Ports function displays the current status of some hardware ports.
For the meaning of the displays, please refer to the description of the MC
hardware. To make orientation easier, the relative addresses of the ports are
indicated below. To obtain the actual port address, add the base address of the
hardware to the relative address.
To select the HW-Ports function:
Press the Login Ipo (or Login SimIpo) soft key.
Press the HW soft key.
Press the HW-Ports I or HW-Ports II or HW-Ports III soft
key.
The functions display the status of the following hardware signals:
Variable Display
HW-Ports I WD (IPO)
_SH2_p(CCU): Base address + 0x 330c
_NE1_p (I3): Base address + 0x330e
_NE2_p (I32): Base address + 0x3304
_24V_plc2on:
_24V_plc3on:
_SH1AB_1_p: Base address + 0x3208
_SHS1AB_1_p: Base address + 0x3204
EN_SH2:Base address + 0x6000
EN_NE1:Base address + 0x6004
EN_PL:Base address + 0x6004
EN_REG:Base address + 0x6006
EN_MS:Base address + 0x6008
EN_AT:Base address + 0x600a
EN_ACFAIL:Base address + 0x600c
IRQ_SH2:Base address + 0x6010
IRQ_NE1:Base address + 0x6012
IRQ_PL
IRQ_REG:Base address + 0x6016
IRQ_MS:Base address + 0x6018
IRQ_AT:Base address + 0x601a
IRQ_ACFAIL:Base address + 0x601c
IRQ_SYNCPWM:Base address + 0x601e
To Next Page
Loading...
