HEIDENHAIN MANUALPLUS 620 - Page 1202

1202 HEIDENHAIN Technical Manual MANUALplus 620
Counter function
blocks of the MC
(GAL Data)
GAL Data allows you to display the internal registers of the counter function
blocks of the MC.
To select the GAL Data function:
 Press the Login Ipo (or Login SimIpo) soft key.
 Press the HW soft key.
 Press the GAL Data soft key.
The GAL Data variables have only an IPO-internal meaning:
Variable Display
reg0_low
reg0_mid
reg0_hig
reg1_low
reg1_mid
reg1_hig
init_reg_1
cntrl_reg_1
Rl_reg
latch_reg
irq_reg
offset00_reg
offset90_reg
timer_reg
cntrl_reg_2
cntrl_reg_3