January 2012 6.22 Diagnosis with the Online Monitor (OLM) 1201
Data of the static
RAM (S-RAM)
This function displays the data stored in the static RAM of the IPO.
To select the S-RAM function:
Press the Login Ipo (or Login SimIpo) soft key.
Press the HW soft key.
Press the S-RAM soft key.
The function displays the following variables:
Data of the analog
outputs (Analog
Output)
Use AnalogOutput to display the nominal commands. – The values of the
outputs are not returned.
To select the Analog Output function:
Press the Login Ipo (or Login SimIpo) soft key.
Press the HW soft key.
Press the Analog Output soft key.
The function displays the values of the analog outputs in [V]:
Output1
Output2
...
Output16
Variable Display
kennung1 Internal code
kennung2 Internal code
absActPos Switch-off position of the individual axes
absActPosNonMod Switch-off position of the individual axes
refPosition Reference position of the individual axes
modCntrEndat Overflow of multiturn EnDat encoder
checkSum Checksum of current machine parameters
valid Validity code
To Next Page
Loading...
