HEIDENHAIN MANUALPLUS 620 - Page 1206

1206 HEIDENHAIN Technical Manual MANUALplus 620
Encoder
data
With Encoder Data, you display the information on the encoder.
To select the Encoder Data function:
 Press the Login Ipo (or Login SimIpo) soft key.
 Press the HW soft key.
 Press the Encoder Data soft key.
The index is structured as follows:
 0 to 9: Position encoders of the MC
 10: Speed encoder (index 0; CC 0)
 11: Position encoder (index 0; CC 0)
 12: Speed encoder (index 1; CC 0)
 13: Position encoder (index 1; CC 0)
 . . .
 32: Speed encoder (index 5; CC 1)
 33: Position encoder (index 5; CC 1)