HEIDENHAIN MANUALPLUS 620 - Page 1208

1208 HEIDENHAIN Technical Manual MANUALplus 620
Data of the
"Fast Inputs"
This function displays information on the fast inputs.
To select the Fast Inputs function:
 Press the Login Ipo (or Login SimIpo) soft key.
 Press the HW soft key.
 Press the Fast Inputs soft key.
The index is structured as follows:
 0 to 4: Fast inputs of the PLC
 5 to 9: Trip dogs of the spindles
The OLM displays the following data of the fast inputs:
Variable Display
inUse Fast input is configured
usedFor  Nothing
 Plc
 Axis (spindle)
axisIdent Index of the axis from axisList
axisKey Key of the axis from axisList
number Number of the input:
 No HSCI: I0 to I31
 HSCI: All inputs are permitted
set Status of the input (0/1)