HEIDENHAIN MANUALPLUS 620 - Page 1226

1226 HEIDENHAIN Technical Manual MANUALplus 620
If the dialog text files for the selected language are not on the PLC partition,
the error message LANGUAGE LOAD ERROR appears. The MANUALplus 620 will
then try to open the dialog text file in the directory "..\en" (English).
The file names of the dialog text file are the same for all languages. The file
names are usually defined in parameters.
 Store the dialog texts you created under the same file name in permanently
defined directories.
In MP_ncLanguage you define the end of the path indicating the NC
conversational language (language abbreviation).
MP_ncLanguage
NC conversational language
Available from NCK software version: 597 110-01.
Format: Selection menu
Selection: ENGLISH
GERMAN
CZECH
FRENCH
ITALIAN
SPANISH
PORTUGUESE
SWEDISH
DANISH
FINNISH
DUTCH
POLISH
HUNGARIAN
RUSSIAN
CHINESE
CHINESE_TRAD
SLOVENIAN (software option #41)
SLOVAK (software option #41)
LATVIAN (software option #41)
NORWEGIAN (software option #41)
KOREAN (software option #41)
ESTONIAN (software option #41)
TURKISH (software option #41)
ROMANIAN (software option #41)
LITHUANIAN (software option #41)
Default: ENGLISH
Access: LEVEL1
Reaction: RUN
In MP_plcDialogLanguage you define the end of the path indicating the PLC
conversational language (language abbreviation).